Sale!

Sur Ron 72V EBMX X9000 V1 Race V2.5, 72v 42Ah Black , Gold, Blue, Purple, Red

Original price was: £3,647.99.Current price is: £3,349.00. (price including VAT)

Sur Ron 72V EBMX X9000 V1 Race V2.5, 72v 42Ah

Category: Tag:

Description

Sur Ron 72V EBMX X9000 V1 Race V2.5, 72v 42Ah Battery

Black , Gold, Gold, Blue, Purple, Red

Higher Volts, Higher Amps Higher RPM+  Higher Speed !

This is truly plug n play and expect RELIABLE speeds of around  75+ MPH
All taxes and import duties paid and free UK shipping

580A Phase and 15800W (with aftermarket motor)

MASSIVE SAVING BOUGHT AS KIT !! (controller + battery)

Sorry no international Air shipping. UK + EU land ship available (For EU please email)

Free FAST UK Shipping (from UK stock)

 

EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Dirt Bike Motor Controller.

The X-9000 has been purpose built from the ground up with a wide range of dirt bike riders in mind and is capable of power inputs of up to 36kW and 900 phase amps and includes many custom features to dial in the performance and feel of your electric dirt bike.

X–9000 Controller Kit

Comes complete with everything needed for self-installation including plug and play compatibility for Sur Ron Light Bee, Talaria Sting and *Ultra. This will work with all batteries that are 60V 72v 80v and 24s

Using components sourced from reputable suppliers, each item has been engineered for peak performance, strength and reliability; from the CNC machined internals and bus bars, custom electronics design, injection molded cover and fully waterproof construction to the custom phone app to build custom tunes, this controller is raising the bar for the industry.

Whether you are trying to nail a wheelie, riding hard Enduro, competing in a race series, commuting to work, or just cruising the trails with your family the X-9000 is built to give you ultimate freedom and control.

We stock: Black , Gold,  Blue and Red. Please state on check out notes which you would like.

Kit Includes:

  • SW102 Display with custom EBMX firmware and display settings.
  • Harness extension for Sur Ron Light Bee and Talaria Sting
  • Variable Thumb Throttle
  • Air Cooled Heatsink in Black, Red, Blue or Gold
  • Harness for programmable 12v outputs
  • Free access to the EBMX App
  • All mounting hardware is re­used from the stock controller.
  • Programming cable and Blue­tooth module

Install video can be watched here:

EBMX App User Manual: https://drive.google.com/file/d/11jmD4QAz2745wXwXT0rU_mG-NSMy7ssB/view?usp=sharing

EBMX x-900 Android App: https://play.google.com/store/apps/details?id=com.ebmx.ridecontrol

EBMX x-900 IOS/Apple App: https://apps.apple.com/us/app/ebmx/id1660497388

EBMX application tutorial can be found here: https://www.youtube.com/watch?v=Lh9kwcJHH7o

 

Race V2.5, 72v 42Ah Battery

We upgrades this very popular battery to handle more power. The More nickle sheet (lower resistance and heat). Bigger more powerful hybrid BMS giving 80 Amps more, A new stronger lifting stapes and new stunning graphics

Designed to run the: ASI BAC4000, ASI BAC8000, EBMX X 9000, KO Controllers,  Nuclear controllers  (any 72v capable controller) up to DC line 180A and 400 Amps Peak 20KW (peak)

Please make sure your controller is set to a power rating that will not damage your motor. The battery is the “fuel tank” and it is the controller that controls  how much “fuel” (Power) it takes and gives to the motor.

This will not work with the original X Controller.

These power packs are designed for ultimate power supply and are 57.5% bigger watts hours (3024) compared to the standard battery (1920) and able to give out 3 times the power (discharge -amps)

High Power Sur Ron Battery 20S10P 72v  3024Wh 42Ah Molicell p42A 21700 cell (high power 4200 mAh  per cell),  with ANT  Hybrid Bluetooth BMS (works on IOS and Android) designed to fit inside the Sur Ron battery compartment utilizing the existing battery tray. The Cells are genuine branded 21700 cylindrical cells (not cheaper pouch) specifically designed for high output discharge and sustained high drain. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 200 cells that retail in the UK for around £8 each! not including: BMS, fabrication and shipping taxes. Now with marine grade 316 stainless steel powder coated cases. The whole battery is fitted in  hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.

Specifications.

20s1op Molicell p42A 21700.
Bluetooth ANT BMS set at 400  Amps Peak 220A constant, 16kW full battery protection including over discharge (shorts) over heating etc
Each cell with additional individual wrapping for added protection.
Additional layers of fibre board, Kapcon tape, heat shrink with internal/external powder coated stainless steel sealed box to give maximum protection and insulation.
Double sandwich configuration using 0.2mm pure welded Nickle sheet.
Bluetooth BMS giving individual series condition with balanced charging and on/off function via a mobile device (we recommend always leaving on – never use SHUTDOWN)
An integrated handle for lowering the battery in and out.
Charging port via an XT60 connector.
The main battery to controller connectors we use are the same type as used by Sur Ron to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery is in a super tough hand built stainless steel 316 case designed to keep your battery safe in an accident and waterproof except immersion or direct jet washing at the cable exits.. Designed to fit straight into the bike and maximize the whole battery compartment (the hatch bolts need swapping  out with longer bolts that we supply – 2 minutes and simple). No movement- no rattles!
From our tests, not all Sur Ron frames are exactly the same. Sur Ron recently seem to have let their quality control down a bit. On our mark two prototype (pre releases) we suddenly found that our case did not fit in the 4th bike we tested it in , Sur Ron hand not cleaned the battery compartment frame welds. We then went back to the drawing board and re-designed the case.
The new and for sale case has flitted all 4 test bikes. Its a snug and tight fit to maximize the cell capacity and keep the battery as low as possible. It is very slightly possible that there is anther bike out there with poor welds. In this case there is a very  small possibility that your bike welds will need cleaning up with a Dremel/grinder, although with this latest design we have not found this in over 50 installs. This is a simple job and causes no damage to the bike. I would like to make the point clear that we do not expect this to be needed  by 99.9% of our customers the battery should slot straight in.

Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees  factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the mark-up is minimal!

When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing battery has no special order.

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.

For bike that do not have a display to show voltage, We include a handlebar mounted display to be located on the throttle side. Simply plug into the charge port of the battery when riding.

THIS KIT DOES NOT INCLUDE A CHARGER. Chargers can be found here:
https://www.electroncycles.co.uk/product-category/batteries/

 

* UK Warranty 

* 12 Month Warranty is for manufacturing defaults and does not cover miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. Th battery is waterproof but will not take direct water flow to the discharge cables form a jet wash or hose pipe – this is not covered. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Warranties are not transferable.

We reserve the right to slightly modify or change this product without notice.

Bike not included

Disclaimer:

Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.

 

 

Additional information

Weight 18 kg
Dimensions 50 × 28 × 35 cm