£3,988.00 Original price was: £3,988.00.£3,699.00Current price is: £3,699.00. (price including VAT)
Talaria (all Stings) 72V EBMX X9000 V2 + Dominator V3, 72v 55Ah
* (28Kw Burst, motor and use permitting)
EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Dirt Bike Motor Controller.
The X-9000 V2 has been purpose built from the ground up with a wide range of dirt bike riders in mind and is capable of power inputs of up to 36kW and 900 phase amps and includes many custom features to dial in the performance and feel of your electric dirt bike.
X–9000 V2 Controller Kit (full set up support included)
Comes complete with everything needed for self-installation including plug and play compatibility for Sur Ron Light Bee, Talaria Sting (*Ultra) This will work with all batteries that are 60V 72v 80v and 24s
Using components sourced from reputable suppliers, each item has been engineered for peak performance, strength and reliability; from the CNC machined internals and bus bars, custom electronics design, injection molded cover and fully waterproof construction to the custom phone app to build custom tunes, this controller is raising the bar for the industry.
Whether you are trying to nail a wheelie, riding hard Enduro, competing in a race series, commuting to work, or just cruising the trails with your family the X-9000 V2 is built to give you ultimate freedom and control.
We stock: Black , Gold, Blue, Purple and Red. Please state on check out notes which you would like.
Kit Includes:
Install video can be watched here:
EBMX App User Manual: https://drive.google.com/file/d/11jmD4QAz2745wXwXT0rU_mG-NSMy7ssB/view?usp=sharing
EBMX x-900 Android App: https://play.google.com/store/apps/details?id=com.ebmx.ridecontrol
EBMX x-900 IOS/Apple App: https://apps.apple.com/us/app/ebmx/id1660497388
EBMX application tutorial can be found here: https://www.youtube.com/watch?v=Lh9kwcJHH7o
Our premium battery just got better!!! We swapped out the brilliant Molicell P42A and upgraded to one of the most expensive cells money can buy: The class leading Samsung 50S 21700 cylindrical steel jacketed cells (no puffy cheap pouches here). These cells give almost 20% more range than the Molicell and can supply the monster amp draw our controllers require.
We then swapped out our standard 330A BMS for a special order 400A BMS. This means these batteries can now continuously supply 180 amps and burst to 400A. This new super high output power can now handle bikes with the extra powerful: Sotion, EBMX and KO motors; yet keep the std OEM Talaria motor running for huge long rides.
We then upgraded the casing from Stainless steel 304 to marine grade 316 so absolutely no rust issues here! Super tough and powder coated inside and out.
And last of all, and by no mean feat we massively improved the internal transfer of power by replacing all the connectors with pure copper sheet. This lowers resistance, reduces internal heat and make the battery even more efficient as it delivers sustained higher power to your controller.
Fitting.
The battery uses two sets of discharge cables. One to fit the original bikes connector (for Talari we supply an adapter so it can alos fit a Sur Ron too). The second goes to an additional cable that we provide that is fixed direct to the controller. This enables the power to be fed “In Parallel” increasing the electrical flow, reducing resistance and reducing harmful heat. It shares the power delivery and takes the strain away from the original loom. Howver these must be connected in a correct order (Simple instructions supplied)
When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing battery has no special order.
Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.
Please note, charger is not supplied but can be found here:https://www.electroncycles.co.uk/product-category/batteries/
The battery does require an after market battery compartment lid of seat lifting kit (not inlcuded).
Battery compartment lids or Lifting Kits, can be found here:
We do not warranty damage caused from your fitting. Every kit is bench tested before leaving our premises.
We give UK support!!!!
* UK Warranty
Our warranty is limited to 6 months from time of purchase. Due to the use and the nature of this device (Off-Road) and the potential excess exposure to: water, rain, mud and the possibility to sustained high powered use/abuse, we do not warranty controllers that show signs of damage, excess heat or water penetration. All devices are fully bench tested working with a full working motor before leaving our premises. Any damage caused by your installation is not covered by our warranty. alteration may void warranty. This includes shortening of cables and changing connectors. We highly recommend the use of one of recognized fitters where installation is fully covered.
Warranties are not transferable.
We reserve the right to slightly modify or change this product without notice.
*Bike not included
Disclaimer:
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.