£2,099.00 Original price was: £2,099.00.£1,999.00Current price is: £1,999.00. (price including VAT)
Talaria Battery 72v 42Ah 25Kw Race V3 High Power 3000Wh
9 in stock
Shipping: UK next day (Free. Additional Shipping for Highlands and Islands +£30). EU land ship available, bank transfer only (20% VAT Removed) (For EU please email: info@electroncycles.com) Cash on collection available by appointment
Power: High 25Kw Range: Medium 3000 Height: Low 353 mm
This is Talaria Battery 72v 42Ah 25Kw Race V3 High Power 3000Wh capable of peak 25kW power (400A peak discharge for 51 seconds until cut off on mosfet temp protection)
15kW continuous at 220A discharge run for 4 minutes and 16 second continuous load until cut off on mosfet temp protection.
Updated BMS and handle straps and improved internal configuration. Upgraded stainless steel 316 casing
RaceV2 72v 42Ah = 15.6kW 220A DC Constant, Burst 400A 25Kw
Designed to run the ASI BAC, EBMX and KO Controller at 200A DC and 560A Phase (any 72v capable controller) up to 400 Amps Peak and use on the Talaria
If this battery is to be used by a third party controller the controller can not be set above 16000 Watts.
This will not work with the original controller.
We upgrades this very popular battery to handle more power. The More nickle sheet (lower resistance and heat). Bigger more powerful hybrid BMS giving 80 Amps more, A new stronger lifting stapes and new stunning graphics
Talaria Battery 72v 42Ah 25Kw Race V3 High Power 3000Wh 42Ah Molicell p42A 21700 cell (high power 4200 mAh per cell), with ANT Bluetooth BMS (works on IOS and Android – for cell balance use only) designed to fit inside the Talaria battery compartment utilizing the existing battery tray. The Cells are genuine branded cells specifically designed for high output discharge and sustained high drain. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 200 cells that retail in the UK for around £8 each! not including: BMS, fabrication, shipping and taxes.
The whole battery is fitted in hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.
Torp do not like direct power to the controler 9our second cable), so please just do not use the additional power cable. We do not like to remove these as often buyers transfer batteries to another bike
To stop rattles and hold the battery firmer, we include a piece of high density foam – see photos
QS8 Connector avaialable on second connector on request, Free of charge
Because of the extra Battery height, an aftermarket battery compartment lid is recomnededand should be fitted for Talaria bikes. Some customers have opted for the more simple method of removing the original lid and adding 3mm of washers/spacers under the lock loop that hangs down from the battery compartment lid.
Battery lid can be found here : https://www.electroncycles.co.uk/product/replacement-strap-and-buckle-for-ec-talaria-and-sur-ron-batteries/
This battery is a very tight fit in the bike heigh wise and we do recomend using the after market lid extender:
Talaria Battery Compartment Injection Moulded Battery Lid, To Fit Taller Batteries (Not 3D printed)
Please ALSO note, these are genuine new cells and made up into a complete battery specially designed by us, built at our oversees factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the mark-up is minimal!
When connecting the battery to the bike and to avoid a spark, turn the red trip switch on the bike to off, connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing battery has no special order.
Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.
For bike that do not have a display to show voltage, we include a handlebar mounted display to be located on the throttle side. Simply plug into the charge port of the battery when riding.
* 12 Month Warranty is for manufacturing defaults and does not cover miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!
Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.
Please note, charger is not supplied but can be found here:https://www.electroncycles.co.uk/product-category/batteries/
We reserve the right to slightly modify or change this product without notice.
Disclaimer:
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.
Lithium batteries by nature are considered hazardous items and should never be brought in to the family home or any other structure where fire may cause risk to: life, injury or possession. Batteries should always be charged and stored in a safe fireproof place. While being used, the safety to others and others property must be considered and is the direct responsibility of the purchaser. Any harm to the purchaser or other third parties or property is not the responsibility of Electron Cycles or any person trading on or behalf of the business known as Electron Cycles and hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any products or any costs or damages resulting from these items purchased or otherwise obtained from Electron Cycles or any person trading on or behalf of the business known as Electron Cycles