£1,849.00 Original price was: £1,849.00.£1,699.00Current price is: £1,699.00. (price including VAT)
Sur Ron Battery Electroncycles Trail V2 60v 65Ah Long Range “Direct Swap” (ASI, EBMX, Torp, KO, Compatable)
7 in stock
Shipping: UK next day (Free) Additional Shipping for Highlands and Islands +£30. EU land ship available, bank transfer only (20% VAT Removed) (For EU please email: info@electroncycles.com) Cash on collection available by appointment
Power: Medium (11Kw) Range: Very High (39 Wh) Height: Medium (353mm)
Designed to run on the standard Sur Ron bike as a direct swap in battery, increasing the range over 200%.
Use your standard controller (no real power increase – just range) or swap out your controller and set it to 175A DC (for ASI can be set at 11000W) and phase max at 440A. Use with the: ASI BAC4000, ASI BAC8000, Torp and EBMX X-9000 controllers (any 60v capable controller); have a safe and genuine fast bike that will give heaps of range and fun. The battery is very similar design as its fast brother, but using a different cell and configuration to give maximum range without being crazy tall. We have given this battery a huge range. Perfect for trail riding or long distance commuting.
These are designed to go straight into a standard bike with a standard controller or for bikes that are set at 175A DC 440A phase.
Please note on L1e Bikes, orange warning lights will flicker on the main display (we cover them up and they have no effect on the bike) and a small error code will appear on the display – there is no fix for this. Use the voltmeter included to know battery state of charge – empty at 48V.
If this battery is to be used by a third party controller, maximum setting 175A. DC Phase 440PhA, Watts 11000
This will work perfectly with the original standard controller but still only taking 4-5000 watts (you need a bigger controller for more power).
High Power Sur Ron Battery Samsung 21700 cell, with ANT Bluetooth BMS (works on IOS and Android) designed to fit inside the Sur Ron battery compartment utilizing the existing battery tray. The cells are genuine branded cells specifically designed for large capacity storage and reliability. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 208 cells that retail in the UK for around £6 each! not including: BMS, fabrication, shipping and taxes.
The whole battery is fitted in hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.
The battery does not have an integrated voltmeter. If you are using this with a standard controller, a handlebar voltmeter is supplied and can be simply plugged into the charge port of the battery to show voltage (empty at 48V). For aftermarket controllers, that show battery voltage (like ASI), the voltmeter is not required.
Some versions of the Sur Ron controller may go into limp mode if using this battery with no communication port (not using an aftermarket controller). This will need a very simple mod to the plug that normally connects to the battery. Please see the photo of the battery communication connector and the two pins that are crossed with a simple piece of: wire, or spade connector or similar piece of conductive metal. Note the area circled in red.
For bikes that do not have a display to show voltage, we include a handlebar mounted display to be located on the throttle side. Simply plug into the charge port of the battery when riding.
Sur Ron in their wisdom have changed the battery conector for the 2024 model. It doesent take as much power and very difficult to obtain. These connectors are not compatable with our batteries (or anyone elses). The simple work around is install a pre 2024 loom. Takes about 30 mniniutes. If you then want to run your OEM 2024 battery, you will need to purchase an adapater. Most people sell their OEM battry to offset the cost of this much longer range and more powerful battery upgrade. Pre 2024 battery loom: https://www.electroncycles.com/product/surron-light-bee-battery-power-cable/
Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, thanks to PayPal fees, shipping and taxes the markup is minimal!
When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off.
Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.
Electron Cycles Limited is an introducer appointed representative of Ideal Sales Solutions Ltd T/A Ideal4Finance. Ideal Sales Solutions is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and term.
Charger Not included.
Bike battery compartment lid shown in photos not included.
Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.
Please note, charger is not supplied but can be found here:+https://www.electroncycles.co.uk/product-category/batteries/
* Warranty, due to the nature of use of these devices (off road) manufacturer warranty is limited to 12 months from date of purchase of the battery. Any damage the result of water ingress, alteration, may void warranty. Failure to comply with the correct connection procedure, may lead to damaged to the BMS and connection plugs and will not be covered by warranty. This includes shortening of cables and changing connectors. It is the owners responsibility to proof against water ingress and not use in unacceptable very wet conditions, or use direct water from hose/washers. Warranties are not transferable. We do not warranty second hand goods. We reserve the right to slightly modify or change this product without notice.
** Bike not included
Disclaimer:
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by the Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility or any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that the Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacturer of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that under no circumstances shall the Seller or manufacturer be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.